Home > Engineering > Civil Engineering > Volume-2 > Issue-2 > Direct Tension Test on Expanded Metal Mesh and Welded Square Mesh for Ferrocement Composite

Direct Tension Test on Expanded Metal Mesh and Welded Square Mesh for Ferrocement Composite

Call for Papers

Volume-3 | Issue-2

Last date : 25-Feb-2019

Best International Journal
Open Access | Peer Reviewed | Best International Journal | Indexing & IF | 24*7 Support | Dedicated Qualified Team | Rapid Publication Process | International Editor, Reviewer Board | Attractive User Interface with Easy Navigation

Journal Type : Open Access

Processing Charges : 700/- INR Only OR 25 USD (for foreign users)

Paper Publish : Within 2-4 Days after submitting

Submit Paper Online

For Author

IJTSRD Publication

Research Area

News & Events


Direct Tension Test on Expanded Metal Mesh and Welded Square Mesh for Ferrocement Composite

Pallavi Sameer Parande

Pallavi Sameer Parande "Direct Tension Test on Expanded Metal Mesh and Welded Square Mesh for Ferrocement Composite" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-2 , February 2018, URL: http://www.ijtsrd.com/papers/ijtsrd9668.pdf

Ferrocement is a special type of mortar which is usually reinforced with steel wires which can perform very well as far as crack control, impact resistance and toughnes is concern. Ferrocement has very high tensile strength to weight ratio. This project presents an experimental study on Tensile strength of different wire meshes which normally used now a days. The main objective of these experimental tests is to study the effect of using different types as well as different number of wire meshes. Test result shows that elongation of Expanded wire mesh is quite high than Welded Square Mesh.

Ferrocement, Expanded Wire Mesh, Welded Square Mesh, Elongation, Tensile Strength


Volume-2 | Issue-2 , February 2018

2456-6470

IJTSRD9668