A Review on Airflow and Temperature Distribution in A Residential Building with an under Floor Air Distribution System

This paper presents the investigation to evaluate an under floor air distribution (UFAD) system existed in a Residential building. Despite the fact that UFAD systems are being applied in the field in increasing numbers, there is a strong need for an improved fundamental understanding of several key performance features of these systems. Recent trends in today’s Residential environment make it increasingly more difficult for conventional centralized systems to satisfy the environmental preferences of individual persons using the standardized approach of providing a single uniform thermal and ventilation environment. Under floo distribution (UFAD) is an air distribution strategy for providing ventilation and space conditioning in buildings as part of the design of an HVAC system. UFAD systems use an under floor supply plenum located between the structural concrete slab and raised floor system to supply conditioned air through floor diffusers directly into the occupied zone of the building. Thermal stratification is one of the featured characteristic of UFAD system, which allows higher thermostat set points compared to the overhead systems (OH). CFD models have been used to study indoor air quality (IAQ) problems, pollutant distributions, and performance of UFAD systems. The increasing developments of computational fluid dynamics (CFD) in the recent years have op possibilities of a low-cost, yet effective, method for improving UFAD systems in design phase, with less experiment required. | Volume – 2 | Issue – 4 | May-Jun 6470 | www.ijtsrd.com | Volume Journal of Trend in Scientific and Development (IJTSRD) International Open Access Journal , Prof. Yogesh Tembhurne RGPV Bhopal, , RGPV Bhopal, MP, India

ABSTRACT This paper presents the investigation to evaluate an under floor air distribution (UFAD) system existed in a Residential building. Despite the fact that UFAD systems are being applied in the field in increasing numbers, there is a strong need for an improved fundamental understanding of several key performance features of these systems. Recent trends in today's Residential environment make it increasingly more difficult for conventional centralized systems to satisfy the environmental preferences of individual persons using the standardized approach of providing a single uniform thermal and ventilation environment. Under floo distribution (UFAD) is an air distribution strategy for providing ventilation and space conditioning in buildings as part of the design of an HVAC system. UFAD systems use an under floor supply plenum located between the structural concrete slab and raised floor system to supply conditioned air through floor diffusers directly into the occupied zone of the building. Thermal stratification is one of the featured characteristic of UFAD system, which allows higher thermostat set points compared to the overhead systems (OH). CFD models have been used to study indoor air quality (IAQ) problems, pollutant distributions, and performance of UFAD systems. The increasing developments of computational fluid dynamics (CFD) in the recent years have op possibilities of a low-cost, yet effective, method for improving UFAD systems in design phase, with less experiment required. @ IJTSRD | Available Online @ www.ijtsrd.com | Volume -2 | Issue -4 | May-Jun This paper presents the investigation to evaluate an under floor air distribution (UFAD) system existed in Despite the fact that UFAD systems are being applied in the field in increasing numbers, there is a strong need for an improved fundamental understanding of several key performance features of these systems. Recent trends nvironment make it increasingly more difficult for conventional centralized systems to satisfy the environmental preferences of individual persons using the standardized approach of providing a single uniform thermal and ventilation environment. Under floor air distribution (UFAD) is an air distribution strategy for providing ventilation and space conditioning in buildings as part of the design of an HVAC system. UFAD systems use an under floor supply plenum located between the structural concrete slab and a raised floor system to supply conditioned air through floor diffusers directly into the occupied zone of the building. Thermal stratification is one of the featured characteristic of UFAD system, which allows higher thermostat set points compared to the traditional overhead systems (OH). CFD models have been used to study indoor air quality (IAQ) problems, pollutant distributions, and performance of UFAD systems. The increasing developments of computational fluid dynamics (CFD) in the recent years have opened the cost, yet effective, method for improving UFAD systems in design phase, with less Keywords: Under Floor Air Distribution System, CFD, Experimental, Simulation, Residential Building.

I. INTRODUCTION
Under floor air distribution (UFAD) is an air distribution strategy for providing ventilation and space conditioning in buildings as part of the design of an HVAC system [1]. UFAD systems use the under floor plenum beneath a raised floor to provide conditioned air through floor diffusers directly to the occupied zone. Under floor air distribution is frequently used in office buildings, particularly highly-reconfigurable and open plan offices where raised floors .UFAD is also common in command centers, IT data centers and Server rooms that have large cooling loads from electronic equipment and requirements for routing power and data cables. The ASHRAE Under floor Air Distribution Design Guide suggests that any building considering a raised floor for cable distribution should consider UFAD.
In recent years HVAC system design has been strongly influenced by increasing emphasis on indoor air quality (IAQ), energy conservation, environmental effects, safety, and economics. The relative placement of system components can significantly affect the thermal comfort and energy performance of the air handling system [3]. To design high HVAC systems, it is necessary to gather the det information about the behavior of the airflow in both the spaces and the rooms of the building. The fundamental information concerning the flow floor air distribution (UFAD) is an air distribution strategy for providing ventilation and space conditioning in buildings as part of the design of an HVAC system [1]. UFAD systems use the under floor plenum beneath a raised floor to provide ir through floor diffusers directly to the occupied zone. Under floor air distribution is frequently used in office buildings, particularly reconfigurable and open plan offices where raised floors .UFAD is also common in command ters and Server rooms that have from electronic equipment and requirements for routing power and data cables. The ASHRAE Under floor Air Distribution Design Guide suggests that any building considering a raised floor ion should consider UFAD. (Airports, Industries, public complexes, recreation, In recent years HVAC system design has been strongly influenced by increasing emphasis on indoor air quality (IAQ), energy conservation, environmental effects, safety, and economics. The relative placement of system components can significantly affect the thermal comfort and energy performance of the air handling system [3]. To design high-energy efficiency HVAC systems, it is necessary to gather the detailed information about the behavior of the airflow in both the spaces and the rooms of the building. The fundamental information concerning the flow International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470 Page: 664 comprises air velocity, temperature, relative humidity, and species concentrations. All these parameters are important in assessing thermal comfort and indoor air quality. The conventional design of ventilation systems normally relies on valuable know-how, empirical formulas and past experience. Although practical knowledge and basic methods provide successful solutions, this type of engineering cannot take into account specific air flow patterns which are affected not only by the positioning of openings and exhausts in a room, but by the distribution of objects and energy sources as well. Consequences related to the absence of these elements include over-design and unnecessary cost [4].

Technology Description
A task/ambient conditioning system is defined as any space conditioning system that allows thermal conditions in small, localized zones (e.g., regularly occupied work locations) to be individually controlled by building occupants, while still automatically maintaining acceptable environmental conditions in the ambient space of the building (e.g., corridors, open-use space, and other areas outside of regularly occupied work space) [5].
UFAD systems are uniquely characterized by their ability to allow individuals to have some degree of control over their local environment, without adversely affecting that of other nearby occupants.
The types of diffusers supported, active or passive, further distinguish UFAD systems. Active diffusers (for purposes of this report) are defined as those with local means of volume adjustment (such as an integral variable speed fan or that is amenable to automatic zone control (in addition to means for occupant control). Passive diffusers, although they may have means for occupant adjustment, are combined with terminal or system elements to achieve zone control. Systems designed with all fan-assisted active diffusers typically utilize zero-pressure plenums. Passive diffusers require pressurized plenums. The majority of UFAD systems currently being deployed have pressurized plenums with either active or passive diffusers [6].

System Overview
For purposes of introducing the concept of an under floor air distribution system, it is instructive to identify how these systems differ from conventional ceiling-based air distribution systems. Figures 1 and 2 show schematic diagrams of an overhead system and an UFAD system, respectively, for a cooling application in an open-plan office building [7]. Some of the most important advantages of under floor systems over ceiling-based systems occur for cooling conditions, which are required year-round in the vast majority of interior office space in many parts of the United States. Research evidence is mounting that occupant satisfaction and productivity can be increased by giving individuals greater control over their local environment.

II. LITERATURE REVIEW
Over the past few decades, there were many studies on the CFD analysis and numerical simulations on the indoor environment. According to the previous literature survey, it can be found that the numerical simulation of the UFAD systems mainly focus on the following topics: However, their results are limited to two-dimensional geometry, and the real environment is simplified into regular geometry. Recently, underfloor air distribution (UFAD) systems have become popular design alternatives to conventional air distribution (CAD), such as overhead air distribution systems for thermal and ventilation control (Woods 2004, Webster et al. 2002. This system was first introduced in the 1950s to cool a computer room, and is emerging as a leading ventilation system design in modern commercial buildings. According to Loudermilk (1999), there exist two major advantages of this system. One is that ventilation cool air is certain to reach the occupants (as it is introduced within the occupied zone). Another is that convection heat gains that occur above the occupied zone are isolated from the calculation of the required space supply airflow. The potential advantages of a well-designed UFAD system include (1) improved thermal comfort; (2)

III. CONCLUSIONS
Ever since global warming became a worldwide environmental concern, scientists have worked hard on finding alternative sources of energy other than fossil fuel, which is the main source of carbon dioxide emissions that causes the global warming. At the same time, other scientists are working seriously on minimizing the amount of consumption of fossil fuel until it is totally replaced by an environment friendly type of fuel.
All of the previous research achievements also show that the increasing developments of computational fluid dynamics (CFD) in the recent years have opened the possibilities of low-cost yet effective methods for improving UFAD systems in design phase, with less experiment required.
Based on the literature review, the following conclusions were drawn for the modifications to the Throw Room and planned experiments:  CFD models have been used to study indoor air quality (IAQ) problems, pollutant distributions, and performance of UFAD systems.  The increasing developments of computational fluid dynamics (CFD) in the recent years have opened the possibilities of a low-cost, yet effective, method for improving UFAD systems in design phase, with less experiment required.  Lack of data on CFD model on the UFAD system.  Lack of understanding how UFAD systems work in the real world.  Improved ventilation efficiency and indoor air quality.  Improved occupant comfort, productivity and health.  Reduced energy use.