Home > Engineering > Mechanical Engineering > Volume-3 > Issue-3 > Design and Analysis of Go-Kart Chassis for Front, Side and Rear Impact

Design and Analysis of Go-Kart Chassis for Front, Side and Rear Impact

Call for Papers

Volume-4 | Issue-2

Last date : 25-Feb-2020

Best International Journal
Open Access | Peer Reviewed | Best International Journal | Indexing & IF | 24*7 Support | Dedicated Qualified Team | Rapid Publication Process | International Editor, Reviewer Board | Attractive User Interface with Easy Navigation

Journal Type : Open Access

Processing Charges : 700/- INR Only OR 25 USD (for foreign users)

Paper Publish : Within 2-4 Days after submitting

Submit Paper Online

For Author

IJTSRD Publication

Research Area


Design and Analysis of Go-Kart Chassis for Front, Side and Rear Impact


Chetan Mahatme | Pratik Lande | Surendra Nagpure | Abhishek Pawar | Nikhil Kharabe

https://doi.org/10.31142/ijtsrd22973



Chetan Mahatme | Pratik Lande | Surendra Nagpure | Abhishek Pawar | Nikhil Kharabe "Design and Analysis of Go-Kart Chassis for Front, Side and Rear Impact" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3, April 2019, pp.718-723, URL: https://www.ijtsrd.com/papers/ijtsrd22973.pdf

This paper deals with Go-kart chassis building with the help of modelling software CATIA V15 and analysis of the same for front, side and rear impact. The cassis has been designed for light weight profile and engine mounting of capacity 135cc. The go-kart vehicle is meant for participation in various Go-kart event organized all over the India. The preliminary test for these events is checking of 3-D model of the chassis frame and analysis of the same chassis frame under front, side and rear impact. During collision the chassis is under impact loading conditions so it has to be thoroughly analyzed for impact loads. The studies found below shades some light on how the chassis behaves under impact loading conditions. Chassis is made up of a tubular cross section pipe, fabricated assembly of EN8 grade and a few other grades. In this kart, we have used EN8 class tube with 1 inch diameter and 1.5 mm wall thickness. The results obtained for permissible stresses, Factor of safety and deformation are found to be well within range. This makes the chassis suitable for Go-kart events. The main criteria that has been focused here is maximum deformation and stress. The stresses should be well within Von-mises stress range and so as the Factor of safety. After analysis, both are found to be well within range.

3-D Modelling, analysis, stress, factor of safety, GO-kart, chassis


IJTSRD22973
Volume-3 | Issue-3, April 2019
718-723
IJTSRD | www.ijtsrd.com | E-ISSN 2456-6470
Copyright © 2019 by author(s) and International Journal of Trend in Scientific Research and Development Journal. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0) (http://creativecommons.org/licenses/by/4.0)

International Journal of Trend in Scientific Research and Development - IJTSRD having online ISSN 2456-6470. IJTSRD is a leading Open Access, Peer-Reviewed International Journal which provides rapid publication of your research articles and aims to promote the theory and practice along with knowledge sharing between researchers, developers, engineers, students, and practitioners working in and around the world in many areas like Sciences, Technology, Innovation, Engineering, Agriculture, Management and many more and it is recommended by all Universities, review articles and short communications in all subjects. IJTSRD running an International Journal who are proving quality publication of peer reviewed and refereed international journals from diverse fields that emphasizes new research, development and their applications. IJTSRD provides an online access to exchange your research work, technical notes & surveying results among professionals throughout the world in e-journals. IJTSRD is a fastest growing and dynamic professional organization. The aim of this organization is to provide access not only to world class research resources, but through its professionals aim to bring in a significant transformation in the real of open access journals and online publishing.

Thomson Reuters
Google Scholer
Academia.edu

ResearchBib
Scribd.com
archive

PdfSR
issuu
Slideshare

WorldJournalAlerts
Twitter
Linkedin