Home > Engineering > Civil Engineering > Volume-3 > Issue-5 > A Review on use of Waste Tyre in Cement Concrete Pavement by Replacing Coarse Aggregates

A Review on use of Waste Tyre in Cement Concrete Pavement by Replacing Coarse Aggregates

Call for Papers

Volume-8 | Advancing Multidisciplinary Research and Analysis - Exploring Innovations

Last date : 28-Mar-2024

Best International Journal
Open Access | Peer Reviewed | Best International Journal | Indexing & IF | 24*7 Support | Dedicated Qualified Team | Rapid Publication Process | International Editor, Reviewer Board | Attractive User Interface with Easy Navigation

Journal Type : Open Access

First Update : Within 7 Days after submittion

Submit Paper Online

For Author

Research Area


A Review on use of Waste Tyre in Cement Concrete Pavement by Replacing Coarse Aggregates


Sagar Siwach | Nitin Thakur



Sagar Siwach | Nitin Thakur "A Review on use of Waste Tyre in Cement Concrete Pavement by Replacing Coarse Aggregates" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019, pp.544-548, URL: https://www.ijtsrd.com/papers/ijtsrd26376.pdf

One of the primary construction material that is used worldwide is concrete. For the development trading the most important materials that are used are aggregates and cement, these materials makes the primary and significant constituents for the production of concrete. As for concrete production the natural materials are being used in a greater demand. In a similar context that is required for natural resources utilization has been emerged as an increasing issue for protecting the environment as well as requirement for preserving the natural resources like aggregates that are being exploited through several materials that were actually recycled by the area unit. In this analysis, the study focuses on the replacing the coarse aggregate partially with recycled rubber tyre employment in the construction of concrete along with use of waste tyre that were obtained regionally. The initial sections of this particular study has discussed the background of the study along with the matter extent. The literature review section provides the review or discussion of the various relevant literatures that were performed for in the earlier times in this particular subject area. In this study, various tests were applied on the raw materials to investigate their suitableness and properties for this experimentation study. Three concrete grades that is M15, M20 and M25 are combined to prepare the concrete styles area units. To prepare the specimen, the coarse aggregates is used with different proportion replacement of 10, 25, and 50 for exploiting the mixture of rubber. Furthermore, to perform a comparative analysis, a bearing is developed without any coarse mixture replacement. The samples that were prepared includes beams, cylinders and cubes. After that these concrete samples were tested in the laboratory. The various tests that were performed are as: flexural strength, impact resistance, lastingness, compressive strength, unit weight, and slump tests. These laboratory tests that were performed on the specimen were primarily supported by the information assortment. Results of these tests were then compared with the various concrete properties and it was observed that the concrete’s compressive strength is decreased due to the presence of rubber aggregates. Although, due to this reason there are chances that it cannot be used in some structural applications. Also, along with the decreased compressive strength it has some important characteristics such as increased flexural strength, increased plasticity, higher impact resistance, and lower density. It is shown from the results that recycled rubber tyres can be used in the construction of concrete as coarse aggregates partial replacement. Due to the fascinating rubber aggregates area unit, the replacement proportion should be kept at normal amount as well as applications should be limited for specific cases where it is required to improve the properties.

-


IJTSRD26376
Volume-3 | Issue-5, August 2019
544-548
IJTSRD | www.ijtsrd.com | E-ISSN 2456-6470
Copyright © 2019 by author(s) and International Journal of Trend in Scientific Research and Development Journal. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0) (http://creativecommons.org/licenses/by/4.0)

International Journal of Trend in Scientific Research and Development - IJTSRD having online ISSN 2456-6470. IJTSRD is a leading Open Access, Peer-Reviewed International Journal which provides rapid publication of your research articles and aims to promote the theory and practice along with knowledge sharing between researchers, developers, engineers, students, and practitioners working in and around the world in many areas like Sciences, Technology, Innovation, Engineering, Agriculture, Management and many more and it is recommended by all Universities, review articles and short communications in all subjects. IJTSRD running an International Journal who are proving quality publication of peer reviewed and refereed international journals from diverse fields that emphasizes new research, development and their applications. IJTSRD provides an online access to exchange your research work, technical notes & surveying results among professionals throughout the world in e-journals. IJTSRD is a fastest growing and dynamic professional organization. The aim of this organization is to provide access not only to world class research resources, but through its professionals aim to bring in a significant transformation in the real of open access journals and online publishing.

Thomson Reuters
Google Scholer
Academia.edu

ResearchBib
Scribd.com
archive

PdfSR
issuu
Slideshare

WorldJournalAlerts
Twitter
Linkedin